我们的软管泵真正的源头视频现已上线，解锁产品新视界，视频带你一探究竟！


以下是:软管泵真正的源头的图文介绍


软管泵可应用于多用移动泵站的结构 :自吸高度可达到9米，水平自吸可达200米以上，无需灌泵。特别适合于市政下水道系统的污水、污泥抽排。无堵塞、杂质通过能力强。普通的塑料袋、沙石、编织袋、泥浆、毛发等杂物都不会影响泵的使用。采用原轮泵，耐干运行，泵体坚固耐用、寿命长。使用快速连接接头，方便进出口管道的装配。 整车设计紧凑、适应于狭小空间使用。使用便捷拆卸式防雨布、或硬质钢板隔音罩，低噪音设计，符合环保标准要求。

The hose pump can be applied to the structure of a multi-purpose mobile pumping station: self-priming height can reach 9 meters, horizontal self-priming can reach more than 200 meters, no need for drainage irrigation pump. Particularly suitable for sewage and sludge drainage in municipal sewer systems. No blocking, strong ability to pass impurities. General plastic bags, sand, woven bags, mud, hair and other sundries will not affect the use of the pump. The original wheel pump is resistant to dry running, and the pump body is durable and durable. Use quick connect joints to facilitate the assembly of inlet and outlet pipes. The complete vehicle design is compact and suitable for use in small spaces. Easy-to-remove rainproof cloth or hard steel sound insulation cover, low noise design, meet environmental protection standards.

 



单管软管泵特点:
动力消耗少，可精确计量输出；易损件少，更换时间短；独特无密封结构，不会产生泄露；自吸能力强，可达8米；可正反向运转，具有自清理能力；压轴采用滚动摩擦，泵腔无需加油；结构简单，操作维修方便；出口压力 可达1.6Mpa；输送高粘度、高固含量、固体颗粒、纤维物质、及其他杂志等液物料，不会产生任何堵塞。

Single tube hose pump features:
Less power consumption, accurate metering output; less wearing parts, short replacement time; unique non-sealed structure, no leakage; strong self-priming ability, up to 8 meters; can run forward and reverse, with self-cleaning ability; final shaft Rolling friction, no need to refuel the pump cavity; simple structure, convenient operation and maintenance; outlet pressure up to 1.6Mpa; conveying high viscosity, high solid content, solid particles, fibrous material, and other magazines and other liquid materials, without any blockage .

 




此型软管泵整体结构设计先进，采用外装动、静环式机械密封，可直接水冲洗，耐高压，不易磨损，无泄漏。 体积小，流量大，扬程压力高，适用长距离与高阻力定量输送。 <br />
泵的叶轮与传动齿轮分开，且在泵腔内各零配件之间保证一定的间隙，相互不接触，无磨损，低噪音，可靠性好，使用寿命长，节能降耗。<br />
配置变频器后，可以随意调节流量，并可做一般计量泵使用。                   



豫信致诚机械设备有限公司自成立以来，就以“诚实经营，高质服务”作为服务理念，一方面积j i开拓 云南临沧水渠成型机市场，紧跟信息产业的发展潮流，不断增强 云南临沧水渠成型机中心技术实力，同时还大力加强内部管理，提高员工的整体素质，树立良好形象。并结合客户实际情况科学有效的 云南临沧水渠成型机方案！欢迎来电咨询！




点击查看豫信致诚机械设备有限公司的【产品相册库】以及我们的【产品视频库】